Home
/Products/Construction Division/Concrete Equipment/
Concrete Equipment
Concrete Vibrators
Concrete Vibrators
MBW Inc. offers a Square Head Internal Vibrator system. Studies prove flat vibrating surfaces are more efficient conductors of energy pulses within concrete to provide faster, more effective consolidation. Two motor sizes and various shaft lengths and head sizes give unlimited adaptability to any job. Optional quick-disconnect available for operator convenience. Compare MBW's vibrator series with any other on the market and experience the benefits.
- 12 & 15 amp motors
- Square head varying in size from 13/16" to 2-1/4"
- Flex shaft in lengths from 2' to 20'
- Gas powered backpack units available
- Faster consolidation
- Lightweight
- Heavy duty motor design for long life
- Square head design for superior consolidation
| SPECIFICATIONS |
SHAFT |
HEAD |
| 12 Amp Motor |
2', 5', 7', 10', 14', 20' |
13/16" (2.06 cm)
1" (2.54 cm) |
| 12 Amp Motor |
2', 5', 7', 10', 14', 20' |
1-3/8" (3.49 cm)
1-3/4" (4.45 cm) |
| 15 Amp Motor |
2', 5', 7', 10', 14', 20' |
1-3/8" (3.49 cm)
1-3/4" (4.45 cm)
2" (5.08 cm)
2-1/4" (5.72 cm) |
| Gas Powered Backpack |
7', 10' |
1-3/8" (3.49 cm)
1-3/4" (4.45 cm)
2" (5.08 cm)
2-1/4" (5.72 cm) |
() Metric Measurements.
Specifications subject to change without notice.
* 18-24 ft bars require two ScreeDemon Power units.
EZ Vibrator
The EZ Vibrator provides outstanding vibration on a host of small to medium sized concrete applications. A good fit for tilt-up construction, foundation work, bridge decks, residential walls and flatwork, pavement repairs, box culverts, etc., the EZ Vibrator is powered by a 4 cycle, 1.6hp Robin engine and comes standard with a 6' shaft and 1.38" square head. The 23 lb. unit is nicely balanced with a conveniently located throttle and shoulder harness for ergonomic operation. The EZ Vibe is also a great standby tool in the event of power loss when using electric vibrators.
High Cycle Vibrators
MBW High Cycle Vibration Systems afford users a consistent level of vibration over a broad range of mixes and slump. Typically incurring no more than a 5% loss of eccentric rpm, MBW high cycles provide uniformity in the consolidation of high performance mixes. Moreover, when used with the MBW select-a-cycle converter, engineers/users can fine tune vibration frequency for specific mixes (8000, 10800, or 12000 vpm).
Heads available from 2" to 2-3/8", producing amplitudes ranging from .062 to .100 inches. Shaft lengths from 6 to 30'. Vibrators compatible with all 230 volt, 180 hertz, 3 phase generators. Three styles of select-a-cycle converters.