The GP3550 is a high production compactor that will run decades with reasonable maintenance. The deck features a full roll cage as standard equipment with provisions for a water tank for asphalt compaction on AP3550. The base plate is self-cleaning with an open sided plate design that allows material to flow out and away from the belt/pulley assembly during operation. Both models provide reduced hand/arm vibration, full roll cage protection, enhanced amplitude, faster travel speed and updated yet rugged appearance.
To determine amplitude for a reversible plate use our:
Vibratory Plate Amplitude Calculator
|Engine Option||Honda GX160||Honda GX160|
|Operating Weight||No Water
229 lbs (104 kg)
254 lbs (115 kg)
|226 lbs (103 kg)|
|Plate Size WxL||21 x 22 in (53 x 56 cm)||21 x 22 in (53 x 56 cm)|
|Amplitude||.086 in (1.5 mm)||.087 in (1.5 mm)|
|Centrifugal Force**||3550 lbs (15.8 kN)||3550 lbs (15.8 kN)|
|Exciter Speed||4400 VPM||4400 VPM|
|Compaction Depth*||Up to 21 in (53 cm)||Up to 21 in (53 cm)|
|Travel Speed||Up to 110 ft/min (34 m/min)||Up to 110 ft/min (34 m/min)|
|Compaction Area||11550 sqft/h (1073 sqm/h)||11550 sqft/h (1073 sqm/h)|
|Water Tank Capacity||3 gal
* Clean sand, optimum moisture. MBW recommends that lifts not exceed 12".
** Centrifugal force data for vibratory plates is not an expression of compaction effectiveness or force. See "Beware of Compaction Specifications".
() Metric Measurements. Specifications subject to change without notice.